ArmaKleen – A Provider of Environment Friendly and Effective Aqueous Cleaning Products for Industrial and Commercial Parts Cleaning

Commercial and industrial parts cleaning has always been a tough challenge. While companies are struggling to find the appropriate cleaning solution, the use of substandard cleaning solutions is deteriorating the quality of commercial and industrial parts. With the motivation of coping up with this challenge, two giants of cleaning and environmental solution providers (Arm & Hammer and Safety-Kleen) entered into a joint venture to launch ArmaKleen as the environmentally suitable and economical cleaning solution provider. ArmaKleen is a provider of various aqueous cleaning products that are formulated and tested to cope up with all sorts of cleaning challenges. ArmaKleen's products are not only the best alternatives to solvent-based cleaners, but they are also compliant with environmental regulations.

ArmaKleen Top 5 Aqueous Cleaning Products

Though every product of ArmaKleen is excellently formulated and has been reported to be working exceptionally, still the following are the top 5 aqueous cleaners of ArmaKleen:

4 in 1 Cleaner

4 in 1 Cleaner is a multi-purpose product of ArmaKleen that is designed to be used in parts washers and various other wide temperature range products. It can be used in immersion, ultrasonic, manual, and spray part cleaning machines. It is highly effective to remove petro-based, oil-based, and plant-based stains.

Bio 24

As an excellent water-based, super-concentrated, and bio-based cleaner, Bio 24 is formulated to clean military, industrial, and governmental parts. It is compatible to be used in spray under immersion, spray washing, manual immersion, and ultrasonic equipment. Upon application, Bio 24 effectively removes soils from the copper, polymeric surfaces, steel, and aluminum. It has also shown its exceptional cleaning qualities by removing a variety of soils like lubricating oil, dirt, and grease.

Universal Paint Gun Cleaner

Universal Paint Gun Cleaner is formulated to clean solvent-based paints and uncured water borne in industrial finishing and automotive body shops. Since it works exceptionally well over the ambient temperature, so there is no requirement for pre-heating just before application. Apart from its versatile and ready to use nature, it is also non-flammable, multi-metal safe, and does not incur any sort of paint defects.

M-100 BCR

M-100 BCR is a low pH cleaner that is designed specifically for removing heavy soils and baked on carbon from soft metals and steel. Despite the non-inclusion of free caustics, M-100 BCR is an excellent alternative to free caustics. In addition to removing soils and BCR, it is also capable of brightening aluminum. It can be used in spray wash, immersion, and ultrasonic washing and is used in half concentration as compared to other cleaning products. Moreover, it also provides indoor rust protection if left on the metal surface.

Rust Remover

Rust Remove is an aqueous phosphoric acid-based parts cleaner that is specially designed to remove rust from the iron and steel parts. Moreover, it is also effective against the removal of the heat scale, flux, and similar other oxides. With mild odor, single-step application, low VOCs, and compatibility with ultrasonic, hand wipe, and immersion applications, Rust Remover is an ideal product for industrial and commercial parts cleaning.